View CartMy Account / Order StatusHelp

ABC Garage Door Service & Supplies, Overhead Garage Doors, Nixa, MO



Official PayPal Seal

Join our mailing list!


(Your shopping cart is empty)
You are here:Home > Garage Door Torsion Springs > 1-3/4" Inside Diameter, Torsion Springs w/cones
HOW TO DETERMINE RIGHT TORSION SPRINGS FOR YOUR DOOR
STEP1 Measure overall length of the spring--UNWOUND. Measure spring coils only. (Do not include the winding and stationary ends.)
STEP 2 Measure the Inside Diameter of the spring or look on winding cone or stationary cone for size, (example 175 or 200 meaning either 1 3/4" or 2" ID.)
STEP 3 Determine Wire Size. Measure the length of 10 or 20 coils of the spring then refer to the wire gauge chart below to determine your wire size.
STEP 4 Determine Spring Wind. Standing inside the garage, looking at the spring. If the spring is mounted in the center and points to the right, the spring is Left Hand Wound, (Black Winding CONE). If the spring points to the left, it is Right Hand Wound, (Red Winding CONE).
See diagram below
.
If you have 2 springs, we highly recommend that you replace both springs at the same time unless one has been replaced recently. If you require a length or wire size not shown here please contact us we will make it for you. When measuring your spring wire size measure unwound spring.

Use the chart below to determine you wire gauge. Measure unwound spring if possible.
10 Coils
20 Coils
Wire Gauge Size
1-15/16"3-7/8".192 ga.
2-1/16"4-1/8".207 ga.
2-3/16"
4-3/8".218 ga.
2-1/4"4-1/2".225 ga.
2-5/16"4-5/8".234 ga.
2-7/16"4-7/8".243 ga.
2-1/2"5".250 ga.
2-5/8"
5-1/4"
.262 ga.
2-3/4"
5-1/2"
.273 ga.
CAUTION ! READ WARNING BELOW
Torsion springs can be hazardous, resulting in personal injury if improperly installed or mishandled. Do not attempt install them yourself unless you have the right tools, reasonable knowledge, mechanical aptitude or experience. Never use screwdrivers or other substitutes for winding bars. If you are unsure please call a professional or request professional installation instructions.
All springs listed below are in-stock and ready to ship with in 1 business day of your order.
Sort By:
Page of 1
7/16" x 18" long, Winding Bars or Winding Rods (pair) 7/16" x 24" long, Winding Bars or Winding Rods (pair) 7/16" to 1/2" x 18" long, Machined Winding Bars or Winding Rods (pair)
Usually Ships in 24 Hours
Our Price :$7.50
Usually Ships in 24 Hours
Our Price :$10.00
Usually Ships in 24 Hours
Our Price :$18.99
7/16" x 18" winding bars (pair) 7/16" x 24" long, Winding bars (pair) 1/2" to 7/16" x 18" long, Machined Winding Bars
Winding Bars (pair) used to wind and unwind the torsion springs.
Winding Bars (pair) used to wind and unwind the torsion springs.
Winding Bars (pair) used to wind and unwind the torsion springs.
.192 x 1-3/4" ID Garage Door Torsion Spring with cones: 17" - 35" Length .207ga. x 1-3/4" I.D. x 20" - 35" Length, Garage Door Torsion Spring .218 ga. x 1-3/4" I.D. x length, Garage Door Torsion Spring
Usually Ships in 24 Hours
Usually Ships in 24 Hours
Usually Ships in 24 Hours
.192ga x 1-3/4"I.D. x Length, Garage Door Torsion Springs .207ga x 1-3/4"I.D. x Length, Garage Door Torsion Spring .218 ga x 1-3/4"I.D. Length, Garage Door Torsion Spring
This is a .192 gauge, 1-3/4" ID, Garage door torsion spring configured for left hand wind, right hand wind, or paired.

Options:

  • Spring length: 17" - 35"
  • Fractional option: 1/4", 1/2", or 3/4"
  • Winding option: left hand wind, right hand wind or paired.
Price Range from $17.77 to $27.49 per spring
In-stock ready to ship!

This is a .207 gauge, X 1-3/4" Inside Diameter garage door torsion spring.
Options available:
Most common spring lengths for gauge .207 is between: 20" - 35" in length.
Fractional sizes: 1/4", 1/2", or 3/4" at no additional charge.
Winding option: Left hand wind, Right hand wind, or both as a pair.
Price Range from $20.30 to $32.98
In-stock ready to ship!
This is a .218 gauge, X 1-3/4" Inside Diameter garage door torsion spring.
Options available:
Most common spring lengths for gauge .218 is between: 20" - 35" in length.
Fractional sizes: 1/4", 1/2", or 3/4" at no additional charge.
Winding option: Left hand wind, Right hand wind, or both as a pair.
Price Range from $24.27 to $34.75
In-stock ready to ship!
.225 ga. x 1-3/4" I.D. Garage Door Torsion Spring .234 ga. x 1-3/4" I.D. Garage Door Torsion Spring .243 ga. x 1-3/4" I.D. Garage Door Torsion Spring with winding cones: 30" - 50" length
Usually Ships in 24 Hours
Usually Ships in 24 Hours
Usually Ships in 24 Hours
.225ga x 1-3/4"I.D. Length, Garage Door Torsion Spring .234ga x 1-3/4"I.D. Length, Garage Door Torsion Spring .243ga x 1-3/4"I.D. Length, Garage Door Torsion Spring, LHW, RHW, Cones, Red Winding Cone, Black Winding Cone
This is a .225 gauge, X 1-3/4" Inside Diameter garage door torsion spring.
Options available:
Most common spring lengths for gauge .225 is between: 20" - 40" in length.
Fractional sizes: 1/4", 1/2", or 3/4" at no additional charge.
Winding option: Left hand wind, Right hand wind, or both as a pair.
Price Range from $25.02 to $35.76
In-stock ready to ship!
This is a .234 gauge, X 1-3/4" Inside Diameter garage door torsion spring.
Options available:
Most common spring lengths for gauge .234 is between: 20" - 40" in length.
Fractional sizes: 1/4", 1/2", or 3/4" at no additional charge.
Winding option: Left hand wind, Right hand wind, or both as a pair.
Price Range from $25.02 to $37.15.
In-stock ready to ship!
This is a .243 gauge, 1-3/4" Inside Diameter garage door torsion spring configured for left hand or right hand wind, your choice. Spring length depends on your selection.

Required options
Standard Spring lengths for this gauge: 30" - 50" in one inch increments
Winding option: Left hand wind or Right hand wind

Options available:
Fractional sizes: 1/4", 1/2", or 3/4" at no additional charge.

Price Range from $30.15 to $47.04.
In-stock ready to ship!
.250 ga. x 1-3/4" I.D. Garage Door Torsion Spring with Winding Cones: 30" - 50" length .262 ga. x 1-3/4" I.D. Garage Door Torsion Spring with Winding Cones: 35" - 55" length .273 ga. x 1-3/4" I.D. Garage Door Torsion Spring with Winding Cones: 35" - 50" length
Usually Ships in 24 Hours
Usually Ships in 24 Hours
Usually Ships in 24 Hours
.250ga x 1-3/4"I.D. Length, Garage Door Torsion Spring, LHW, RHW, Cones, Red Winding Cone, Black Winding Cone .262ga x 1-3/4"I.D. Length, Garage Door Torsion Spring, LHW, RHW, Cones, Red Winding Cone, Black Winding Cone .273ga x 1-3/4"I.D. Length, Garage Door Torsion Spring, LHW, RHW, Cones, Red Winding Cone, Black Winding Cone
This is a .250 gauge, 1-3/4" Inside Diameter garage door torsion spring configured for left hand or right hand wind, your choice. Spring length depends on your selection.

Required options:
Standard Spring lengths for this gauge: 30" - 50" in one inch increments
Winding option: Left hand wind or Right hand wind

Options available:
Fractional sizes: 1/4", 1/2", or 3/4" at no additional charge.

Price Range from $30.88 to $48.26
In-stock ready to ship!
This is a .262 gauge, 1-3/4" Inside Diameter garage door torsion spring configured for left hand or right hand wind, your choice. Spring length depends on your selection.

Required options:
Standard Spring lengths for this gauge: 35" - 55" in one inch increments
Winding option: Left hand wind or Right hand wind

Options available:
Fractional sizes: 1/4", 1/2", or 3/4" at no additional charge.

Price Range from $36.95 to $55.32
In-stock ready to ship!
This is a .273 gauge, 1-3/4" Inside Diameter garage door torsion spring configured for left hand or right hand wind, your choice. Spring length depends on your selection.

Required options:
Standard Spring lengths for this gauge: 35" - 50" in one inch increments
Winding option: Left hand wind or Right hand wind

Options available:
Fractional sizes: 1/4", 1/2", or 3/4" at no additional charge.

Price Range from $38.54 to $53.01
In-stock ready to ship!
   
 
ABC Garage Door Service and Supplies

 About Us
 Return Policy
 Become an Affiliate
 Privacy Policy
 Send Us Feedback
 
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © ABC Garage Door Service and Supplies LLC. All Rights Reserved.
Built with Volusion